Go to Top
Techlab Systems (Metrotec+TLS Brands)
Techlab Systems (Metrotec+TLS Brands) > PCN Series Pneumatic Sample Cutters

PCN Series Pneumatic Sample Cutters

By metrotec
February 20, 2018
Comments Off on PCN Series Pneumatic Sample Cutters

Available markets: Worldwide

  • PCN-20/12 Model

    • Cutting Force: 12 kN
    • Maximum specimen thickness: 7-8 mm (plastics)
    • Maximum specimen thickness: 9-10 mm (rubber)
    • Dimensions: 300 x 250 x 510 mm
    • Weight: 72 Kg / 98 Kg (Net / Gross)
    • Box transport dimensions: 450 x 500 x 640 mm

    PCN-20/18 Model

    • Cutting Force: 18 kN
    • Maximum specimen thickness: 7-8 mm (plastics)
    • Maximum specimen thickness: 9-10 mm (rubber)
    • Dimensions: 300 x 250 x 510 mm
    • Weight: 72 Kg / 98 Kg (Net / Gross)
    • Box transport dimensions: 450 x 500 x 640 mm
    * Depending on the hardness of the material to be cut, it is recommended to send samples for evaluation

  • Principles

    Cut-samples of pneumatic operation, for the obtaining by cutting of precise samples (Rubber – Leather – Plastics ..)

    Standards

  • Basic Applications

    Cutting of samples of rubber, leather, flexible foams, soft plastic by cutting, for tests of tensile, compression, tear...

  • Common specifications:
    • Nylon base plate supplied to protect the edges of the cutting dies
    • Base plate: 270 x 200 mm
    • Operation through 2 buttons (security system)
    • Manometer: 0-16 Bar
    • Nominal working pressure: 6 Bar
    Request prices of dies indicating:
    – WITH or WITHOUT ejector samples
    – Of standard manufacturing or by EDM (high precision)
    – The maximum size that can be cut is 200 x 80 mm

    OPTIONS: The equipment can be supplied with a wide range of dies of shapes and dimensions according to requirements. It is also possible to supply a device for approaching the edge of the cutting knife of the die to the sample by means of a screw system.

    Said configuration must be carried out on request, since a different frame than the standard is necessary. It is also possible to supply a sample extraction device in addition to the one with the ejector die itself.

  • The PCN Series Pneumatic Cutters are supplied complete with a nylon plate to protect the cutting edge of the dies.

    The cutting dies are not included in the supply, they need to be ordered separately, indicating the type, standards, …

Techlab Systems reserves the right to modify these values