Go to Top

Charpy-Izod Pendulum Impact Testers for Metals PIC Series

Available markets: Worldwide

    • Impact / Resilience Tests “Charpy”
    • Conforming to Standards ASTM E 23 – DIN EN ISO UNE 148 …
    • AUTOMATIC calibration (obtaining reference angle and losses due to friction)
    • With DIGITAL Control Module with Touch Screen Display
    • With 2 Impact Blades of 2 and 8 mm radius
    • Including 1 clamps s / ASTM for handling samples at low temperatures
    • Including Metallic Protection Cabinet with Methacrylate access door
    • Safety system to block the hammer from falling due to power cut
    • Control Panel of Ascent and Release Impact Mace
    • Brake device by AUTOMATIC actuator
    • AUTOMATIC motorized impact hammer lifting system
    • Dimensions of the sample: 10 x 10 x 55 mm
  • Principles

    The Axial Impact Testing Machine, also called in the industry as a “Charpy-Izod” Impact Pendulum, is used to determine the energy absorbed in the fracture of a standardized metal specimen at high axial impact velocity.

    Standards

    ASTM E23, DIN 148-1, EN 148-1, ISO 148-1
  • Basic Applications

    - Determination of Energy released in Joules due to breakage of a standardized metal specimen due to the axial impact of a hammer and hammer adapted to the applied standard.

    • Maximum Energy Impact: 300 – 450 or 750 J (depending on the model)
    • Maximum impact speed: 5.42 m / s
    • Angle: 150º
    • Distance between pendulum and sample centers: 800mm
    • Distance between supports: 40mm
    • Jaw angle radius: R1 – 1.5mm
    • Edge angle radius: R2 – 2.5mm
    • Blade impact edge angle: 30º
    • Thickness of impact blade: 16 mm
    • Impact energy reading resolution: 0.01 J
    • Dimensions Equipment with Cabin Protection: 2234 mm x 770 mm x 2130 mm (Width X Depth X Height)
    • Weights (Kg) including the safety cabinet:
      – PIC-300 model (300 J): 1470 Kg
      – PIC-450 (450 J): 1550 Kg
      – PIC-750 (750 J): 1770KG
    • Power supply: AC 380 V, three-phase + N + T 50 or 60 Hz
    • Consumption: PIC-300 – 500 W / PIC-450 – 750 W / PIC-750 – 1000 W
    • Sample dimensions: 10 x 10 x 55 mm (U, V 2mm notches)
    • Work Conditions:
      a / Ambient Temperature: + 10ºC to + 35ºC
      b / Relative humidity: ≤ 85%
      c / Around the Pendulum without corrosive environment
      d / Installation on cement base, thickness> to 300 mm
      * Due to the great mass of the Impact Pendulum and protection cabin, it is possible to locate it on a base of
      concrete that in turn rested on anti-vibration feet. In this way it would not be necessary to make any special foundation on the ground to work with this testing machine.
  • 1 Test Pendulum: PIC-300 – PIC-450 or PIC-750
    1 Impact Hammer of 300 – 450 or 750 Joules
    1 Impact Blade of R = 2 mm
    1 Impact Blade R = 8 mm 1 Piece
    1 Testing tongs at low temperatures
    1 Instruction Manual
    1 Letter of Guarantee
    1 Foundation Plan for fixing to the ground
Techlab Systems reserves the right to modify these values